General Information | MW-6L | MW-10L |
鎖模力 | Clamping Force | 20 T | 35 T |
最大開模行程
| Max.Clamping Stroke | 230 mm | 230 mm |
最大拉伸行程 | Max.Stretching Stroke | 380 mm | 380 mm |
模具腔數 | Number of Cavities | 2 Cavities | 2 Cavities |
理論產量 | Theoretical Output | 0.1-2.5 L ; 900 BPH 3-6 L ; 380 BPH | 3-6 L ; 500 BPH |
最大模具厚度 | Max.mould Thickness | 300 mm | 300 mm |
模具最大尺寸 | Space Between Tie Bars | 280*500 mm | 280*500 mm |
Electrical System |
|
|
|
電壓 | Voltage | 380V/3PH/50HZ or Specail Order(支持定制) | 380V/3PH/50HZ or Specail Order(支持定制) |
加熱段數
| Number of Heating Zone | 2 Sections | 4 Sections |
總功率(滿負荷) | Total power (full loaded) | 11 Kw | 20 Kw |
Container |
|
|
|
最大瓶子容量 | Max.Container volume | 0.1-2.5 L(2Cav) 3-6L(1Cav) | 3-6L(2Cav) |
最大瓶子口徑
| Max.Diameter Range | 15-60 mm | 15-60 mm |
最大瓶子直徑 | Max.Container Diameter | 35-220 mm | 35-220 mm |
最大瓶子高度 | Max.Container Height | 450 mm | 450 mm |
Auxiliary System |
|
|
|
低壓工作壓力 | Low Pressure Air pressure | 8-10 Bar | 8-10 Bar |
高壓吹氣壓力
| High Pressure Air pressure | 30 Bar | 30 Bar |
排氣量 | Air Flow Rate | 1.2/30 | 2.0/30 |
Dimension & Weight(L*W*H) |
|
|
|
吹瓶主機 | Bottle Molding Machine | 160*63*190 CM | 165*75*190 CM |
烘箱
| Oven | 138*62*140 CM | 225*69*152 CM |
重量 | Net Weight | 1 Ton | 1.2 Ton |